CODE A-2This model is an
extension of our standard Anggrek cottage (Code A-1) with a total sided
area of 36 m2 ( 388 sqft) and a veranda of 14 m2 (150 sqft). The unit has
a separated bedroom and bathroom, a built-in kitchenette and breakfast bar
and a small living. The house is ideal as a retreat facility, a vacation
home or part of a resort. The house has a typical Bali style carved front
door (*) and French windows along the sides
with 5 mm normal clear glass including mosquito screens. An awning window
in the bathroom. All hardware is copper or brass. The unit has an open
structure, hence no ceilings, except for the bathroom which is fitted with
bamboo matting. The roof section is made from trusses, rafters and purlins
(all in sight) respectively covered with bamboo matting, plywood and
thatch, wood shingles, ceramic tiles or corrugated sheathing. The standard house has single Bangkirai
board sidings. Floor -and siding boards are 25 mm thick (1"). All wood
used is Bangkirai (beams, columns, boards, trusses). All fixtures (screws
and bolts) are stainless steel, grade 304. Not one nail is used, hence the
re-assembly process is fast and simple. Both the exterior and the interior
are treated with 2 layers of Cetol polyurethane coat. The kit comes with a
set of assembly drawings and a detailed assembly manual which includes
pictures taken during the pre-assembly process. Optionally we can provide
the plumbing and electrical lay out drawings. The unit can be re-assembled
with little manpower, however, it is advised that some DIY experience is
available.
(*) The Bali style front door can
be replaced by a full glass door.
 |
|
Typical Bali style carved door |
The estimated lead time for this unit is 8 weeks (*)
Estimated re-assembly time: 5 weeks with 6 persons
Estimated volume: 24 m3
Required container: 20 ft
(*) subject to local holidays and delays due to ceremonies which
regularly take place in Bali.